Three Different Ways to Make a Bow Out of Ribbon
Sep 18, · Katy shows us how to tie the perfect ribbon bow and finish it with fishtails. This bow is ideal for craft projects such as handmade cards and scrapbook layou. Tie the ribbon around the neck of the vase and make a simple bow. If you have 2 ribbons cut, line them up together so that the thinner ribbon is stacked on top of the thicker ribbon. Loop them around the vase together and tie them in a bow as if they were a single ribbon. How much ribbon is needed to make a simple bow? Fifteen to 20 inches of.
Last Updated: December 29, References. This article was co-authored by our trained team of editors and researchers who hod it for accuracy and comprehensiveness. There are 20 references cited in this article, which can be found at the bottom of the page.
This article has been viewed tif, how to tie a small ribbon bow. Learn more You've got your gift all wrapped up and ready to go. All it needs is a pretty bow to finish the look. While you can always buy a stick-on bow from the store, going the extra mile and tying a ribbon around the box will give you a nicer, fancier touch.
Tying a bow around a box is easy, and once you know how to do a basic one, you can try more unique looks, such as the diagonal or the woven look. Hhow tie a ribbon around a box, start by draping the ribbon horizontally across the top of the box with what is the shank of a drill bit left hanging to the side for the bow.
Then, pull the long end of the ribbon under the box and back up to the top, crossing it with the short end so both ends are lying vertically on the box. You can then wrap both ends of the ribbon under the center and pull them up into a knot.
Cut the long end to the length of the short end so your bow will be even, then fold both ends into loops, cross them, and tie them into a bow. To learn how to present a pretty gift by tying your ribbon on the diagonal, keep reading!
Did this summary what is habeas corpus definition you? Yes No. Log in Social login does not work in incognito and private browsers. Please log in with your username or email to continue.
Tips and Warnings. Things You'll Need. Related Articles. Article Summary. Method 1 of Drape the ribbon horizontally across the top of the box. Leave about 4 to 8 inches Do not cut the ribbon yet. You can always cut it shorter later. Pull the rest of the ribbon under the box and back to the front.
Do not flip the box over, or you may lose your place. Instead, lift the box up how bring the rest of the ribboh behind it. Set the box back down once the ribbon comes out the other side. Hie the ribbons across the front of the box. Bring the ribbon towards the middle of the box, then bring the shorter end to meet it.
Twist the ribbons around each other so that they are oriented vertically. Wrap the ribbon around the back of the box and back to the front. Lift the box up again. Pull the longer part of the ribbon behind the box and out the other side. Set the box down again. Measure the ribbon against the first piece and cut it.
Bring your ribbon back towards the middle of the box. Measure it against the end of the ribbon from the beginning tis cut it. Wrap the ribbon under the twisted part. Pull the ribbon across the front sall the twisted part at an angle. Bring it under tibbon twisted part, and back out the way you started. Pull on both ends of the ribbon to tighten the knot. Tie the ribbon into a bow.
Fold both end of the ribbon into loops. Cross the left loop over the right one to make a smaller loop in the middle. Pull the left loop through that smaller loop, then pull to tighten. Adjust the bow, then trim off the excess ribbon. Take a moment to adjust the loops and the tails. If you used a wired ribbon, you can fluff the loops up as well. For a fancier touch, cut the ends hkw the tails into angles or Vs.
Method 2 of Drape your ribbon across the top left corner ribboj the box. Keep the rest hoow the ribbon on the spool on the top edge.
Wrap the ribbon behind the top right corner. Take the spool-side of the ribbon and pull it behind the top right corner, down towards the bottom right corner. Wrap the ribbon across the bottom right corner and under the bottom left corner. Keep the wraps nice and snug so that they don't slide off of the corners.
Bring the ribbon back towards the top left corner. At this point, it would be a good idea to take a moment to adjust the positions of the wrapped ribbons on each hoa the corners.
If they look like they are slipping off, pull them further from the corners. Cut off the excess ribbon. Bring both ribbons towards the center of the top left corner. Measure the spool ribbon against the other ribbon, and cut it down to match. Cross and tie the ribbons. Cross the left ribbon over and under tir right, then tug on both ends to tighten them. Fold both ribbons into loops, then cross the right one over the left—just like tying a vow Once the bow is tight and secure, snip off the excess ribbon at the tails.
For a fancier touch, hpw how to tie a small ribbon bow at angles or into notches. Method 3 of Cut four pieces smsll ribbon for bod length of the box. You will need four smxll of ribbon that are long enough to wrap around the box lengthwise, plus an additional 2 inches 5. You can also use two contrasting colors instead. Use thin satin or balloon ribbon for best results.
Cut four pieces of ribbon for the width of the box. Use the same ribbon as in the previous step. This time, cut the ribbon s,all enough so that it can wrap around the box widthwise, plus 2 inches 5.
Set the first set of ribbons side-by-side down on the table. Take the four long ribbons, and set them down on the table. Set how to digital photo frame box smalk of the ribbons toe.
Place your gift face-down on the ribbons. The box can be centered or off-center, depending on where you want the ribbons to be. Wrap the ribbons around the box and secure them with double-sided tape. Wrap and tape each of the ribbons one at a time; do not tape all of them at once.
Pull the ribbons firmly around the box so that they are nice and snug. The ribbon ends will overlap each other by about 1 inch 2. You can also use glue dots found in the smxll aisle of an arts and crafts store instead of double-sided tape. Secure the next set of ribbons right above the first set. Place a strip of double-sided tape onto the end of each of your short ribbon.
You can make the bow in small or large size depending on the length of the ribbon that you use. The ribbon used can be single-sided, double-sided, wide or thin. They lend different looks to the bow. If you are making a Christmas bow, use red or red-green and white ribbon. The perfect bow would be symmetrical. Ideas. Jul 15, · Upgrade to Pro 1. Measure out 20 in (51 cm) of ribbon. Pick out a 3 to 4 in ( to cm) wide ribbon with a wire running through 2. Fold the 2 sides inwards so they overlap each other. On a flat surface, spread the ribbon out so that the long side 3. Pinch the center of the bow together. Views: 17K. Jan 15, · Now that you know how to tie a perfect bow let’s incorporate it with a hang tag for favor packaging. There are two ways to include a hang tag with your bow. Option 1 is best when using small size ribbon and Option 2 is the best for larger ribbon. With these basic steps you’ll have the tools to put the finishing touches on any of your projects.
Last Updated: November 28, References. This article was co-authored by our trained team of editors and researchers who validated it for accuracy and comprehensiveness. There are 27 references cited in this article, which can be found at the bottom of the page. This article has been viewed , times. Learn more Wired ribbon can be tricky to work with because it does not behave the same way regular ribbon does. Once you know how to handle it, however, you can use it to make beautiful bows, perfect for wreaths, garlands, floral arrangements, and other decorations.
You can even experiment with your own variations by adding tails or additional loops. To make a bow with wired ribbon, start by cutting a length of ribbon to the size you want your bow to be.
Next, make a loop on each side of the center of the ribbon, and make sure the loops are pointing upward. Then, cross the loops over and under each other and gently tug on them to tighten the knot.
You can also straighten the ribbon around the knot for a neater bow. To learn how to make a rose-shaped bow using wired ribbon, read on!
Learn why people trust wikiHow. Download Article Explore this Article methods. Tips and Warnings. Things You'll Need. Related Articles. Article Summary. Method 1 of Cut a length of ribbon. How long the ribbon is depends on how big you want the bow to be. The wider the ribbon is, the more ribbon you will need to cut. This method will create something that looks like the standard bow you'd use to tie shoe laces with.
Make two loops in your ribbon. Find the center of your length of ribbon first, then make a loop to each side of that point. Make sure that both loops are pointing upward. Cross the loops over and under each other. Gently tug on the loops to tighten the knot. This is just like when you are tying your shoes. Gently adjust the length of the tails and the loops.
Pull the loops or tails one at a time until you get the length you want them to be. Stop when the loops are the right length for you, then tug on them both at the same time to tighten the knot.
Don't worry if the tails are too long. Straighten the knot, if needed. If you have a very wide ribbon, the knot in the middle may be wrinkled. Slip your forefingers under each side of the knot on the front of the ribbon. Straighten out the side edges of the knot.
Shape the ribbons and trim the tails. Use your fingers to fluff up the loops to you liking. The wires inside the ribbons will help the loops keep their shape. If you need to, use a pair of scissors to trim the ribbon tails down.
Method 2 of Roll the end of your ribbon into a small loop. Turn the ribbon so that the wrong side is facing you. Roll the end of the ribbon onto itself to form a tube. Hold the tube in place with your thumb and forefinger. This will make the center loop of your ribbon. This method will make a looped bow, like the kind used on floral arrangements and wreaths.
Twist the ribbon and make another loop. Give the ribbon a small twist so that the right side is showing. Pull it under the tubed ribbon to form a small loop. Slip it under your forefinger to hold it in place. Twist the ribbon again and make another loop. Give the ribbon a twist so that the right side is visible again. Make another loop on the other side of the central loop.
Make sure that it is the same side as you second loop. Continue working back and forth, making loops. Give the ribbon a twist each time so that the right side is always visible. Make the loops a little bigger on each row. Wrap a wire around the middle of the bow. Thread a piece of thin wire through the first central loop that you made.
Wrap it under the bow and back through that first loop. Tug on it to tighten it, then wrap it a few more times. Twist the wire shut, then trim off any excess. You could also use a pipe cleaner that matches your ribbon's color. Consider adding some ribbon tails. These types of bows usually don't have tails, but you can add some if you want to. Cut off a piece of ribbon that is twice the length you want the tails to be. Fold it in half, then secure it to the back of your bow with more wire.
Method 3 of Place the end of a ribbon on the center of a book's cover. Choose a book that is the same width as the bow you want to make. Place the end of a wide, wired ribbon on the middle of the book's cove. Wrap the ribbon 5 to 9 times around the book. Keep the ribbon in the same place as you wrap it around the book. This will make your bow look neater in the end. Avoid wrapping the ribbon too tightly, or it will be difficult to slide the bundle off in a later step.
Trim off the excess ribbon, just past the mid-point of the cover. This will help prevent the ribbon from falling apart when you go to tie it together. Slide the wrapped bundle off of the book. Try to keep the loops in place so that they are nice and even. Do not lose the middle of your bundle where the ends overlap.
Wrap a thin wire around the middle of your bundle. Pinch the middle of your bundle first, then wrap a piece of thin wire around the middle. Wrap it tightly so that it creases the ribbon and holds everything together. Don't trim off the excess wire yet.
Another option would be one of those twist ties used on trash bags. Cut ribbon for the tails of your bow.